Searching in stories... |
Timeline |
Options
|
|
||
|
||
|
||
Show the latest entries |
||
Searching in stories... |
Timeline |
The Saunders-Roe SR./A.1 was a prototype flying boat fighter aircraft designed and built by Saunders-Roe. It was tested by the Royal Air Force shortly after World War II.
The SR./A.1 was directly inspired by the (modest) successes experienced by the Imperial Japanese Navy with seaplane fighters such as the Nakajima A6M2-N (an adaptation of the Mitsubishi Zero) and the Kawanishi N1K. In theory, seaplanes were ideally suited to conditions in the Pacific theatre, and could turn any relatively calm area of coast into an airbase. Their main disadvantage came from the way in which the bulk of their floatation gear penalised their performance compared to other fighters.
Saunders-Roe realised that the new turbojet engine presented an opportunity to overcome this drawback. Not requiring clearance for a propeller, the fuselage could sit lower in the water and use a flying boat-type hull. The company first presented their idea – SR.44 -to the Air Ministry in mid-1943. Performance with Halford H.1 engines was estimated at 520 mph at 40,000 ft. Criticism of the design included the wing thickness/chord ratio which was considered by the Ministry to be too high for a high-speed fighter operating at altitude. The design was modified and specification E.6/44 was raised in April 1944 on the modified design with an accompanying development contract for three prototypes in May 1944.
With the end of the war, Saunders-Roe concentrated its efforts on the Saunders-Roe Princess long-range civilian flying boat project, and development of the fighter slipped behind.
The first prototype, piloted by Geoffrey Tyson, flew on 16 July 1947, and while it and its two sisters proved to have good performance and handling — Tyson made a demonstration of aerobatics and inverted flight at the 1948 SBAC Display — the need for such aircraft had completely evaporated with the end of the war. Furthermore, the success of the aircraft carrier in the Pacific had demonstrated a far more effective way to project airpower over the oceans, though Saunders-Roe argued that carriers and their escorts were still very vulnerable to aircraft or other vessels. In addition, the cockpit canopy was small and heavily framed, giving the pilot a poor view outside the aircraft. An automatic mooring system was incorporated so that the pilot could moor the aircraft without external aid or leaving the cockpit. A fundamental problem was that production of the Beryl engine had ceased when Metropolitan-Vickers had withdrawn from jet engine development, and only a limited number of engines was available. The project was suspended and the prototype put into storage in 1950. It was briefly resurrected in November 1950, after the outbreak of the Korean War, before the realisation that it was obsolete compared with land-based fighters, together with the inability to solve the engine problem, forced a final cancellation. The prototype flew for the last time in June 1951.
The two SR./A.1 prototypes were fitted with the first two production Martin-Baker ejection seats built.
Although the aircraft never received an official name, it was referred to by company workers as "Squirt".
Saunders-Roe came up with a design with skis — which Flight called the "Saunders Roe Hydroski" — to bring its performance closer to land-based aircraft. It was designated project P.121.
As the project "received no official support" the company decided on 29 January 1955 not to proceed with constructing a prototype.
United Kingdom : Marine Aircraft Experimental Establishment
The first prototype, serial number TG263, has been preserved and is on display at Solent Sky aviation museum in Southampton. Both other aircraft (TG267 and TG271) were lost in accidents during the four-year flight test programme.
— — — = = — — —
— — — = = — — —
You choosed to show only the famous things! (Via the Options menu)